Ideas For Hang A Wood Fence Gate

Author: penulis | Categories: Wood Fence comments
Awesome Wood Fence Gate

Wood fence gate – The hardest part of any fence installation job hangs the gate. Gates must be flat and even and the distance between your posts must be just right. Your choice of locks and hinges many different types are available will also affect your street installation. If you do not install everything perfectly in place, your street will sink and drag on the ground. To avoid the frustration of a dysfunctional fence gate Follow these simple steps.

When installing the wood fence gate, there is enough space between two of your posts to a port. The room must be big enough for your street, hinges and a lock. Measure the width of your gate and add an additional 2 to 3 inches to measure for the correct distance. See the instructions that come with your hinges and locks. Some hinges and locks may require further distance. Attach hinges to your gate, one near the door top and one near the bottom. Your hinge package should include all necessary screws. Use a drill to drive the screws through the hinges and into the door to secure them into place.

RELATED :   X Wood Fence Panels

Keep the gap in the gap between your posts. Place some scrap blocks of wood under the gate. Hang the door a few centimeters out of the ground to prevent it from pulling. Then for hang a wood fence gate, with your gate in place, use a drill to screw the hinges into your fence pole. Run the screws through the hinges and into the position to secure the door to the post. Make sure you insert all necessary screws into all sides of the hinges. Your gate should now hang on the posts of the hinges. Test the installation by removing wooden blocks from below the port.

Tags: wood fence gate

Comments are closed.