How To Build King Size Wood Bed Frame – King size beds are expensive, sometimes costing more than $ 1,000, you can spend thousands more on a bed frame, or you can build your own using inexpensive lumber and a weekend. Although there are many varieties of the bed frame, provides a simple box platform clean lines and a modern look. From this basic framework, you can add extras like a bookcase headboard, or even the posts holding up a canopy.
Cut the wooden beams in six lengths equal to the height that you want for your king size wood bed frame. Cut your 80-inch and 76-inch plywood sheets as the width matches the length of your cuts in wooden beam. Sand the surface of each of the two 80-inch plywood panels, two 76-inch plywood sheets and both the 80-by-38 sheets. Make an incision beam at each end of the 76-inch plywood sheets, so that the ends and outer edge aligned with the edges of the sheet. Screw them in place with two screws on each end. Build an L shape by attaching an 80-inch sheet of plywood into polished 76-inch sheets. Screw the 80-inch plate in place with two screws. Repeat to build a second L-shape, with the remaining 80-inch steel and polished 76-inch sheets. The cut faces all the debris should face the outside of the L.
Arrange the two L forms a rectangular frame for your king size wood bed frame. Connect by driving wood screws through the face of the loose ends of the 80-inch boards and into the beam. Insert plywood to the frame along the center line. Screw the position that you did the other sheets of plywood. Add the 80-by-38 plywood on top of the frame, side by side. They will run in parallel with the length of the bed frame. Attach them to the frame by driving screws through the leaves and the ends of the six services. Paint the visible surfaces of the bed frame. You can paint the best leaves if you want, but they will not be visible when you put down your mattress.
12 How To Build King Size Wood Bed Frame Photos